There are a lot of options when it comes to cleaning your office or home carpets and sometimes these can be confusing. Companies like http://www.fsacleaning.co.uk always recommend steam cleaning as it’s one of the most popular but that doesn’t mean there aren’t other options. So we’ve listed some of the other ways you can clean your carpet; whether that’s a short pile office carpet or a longer pile instead. Carpet shampoo is a cleaning shampoo for carpet is usually put on the office carpet to develop into a foam. The chemicals within the foam then attract all the dirt present in your carpet and draw it up and out. That is then left to dry and after it has all dried up, it becomes really fragile and then separates from carpet fibres. Whatever remains is then collected using a hoover. This method of shampoo carpet cleaning is very popular because it’s not as expensive as hiring a steamer or using a private company to do so.
Steam Cleaning is a carpet cleaning method is also common due to how well it works. Steam cleaning does not use actual steam to clean the carpet, but very hot water through the fibres of the carpet. The hot water is often between 150-200 degrees and is very effective in getting rid of allergens and dirt. High pressure and hot water are usually sprayed over the carpet and the higher pressure can loosen up the dirt faster. The dirt, which is forcefully eliminated, is then sucked using a vacuum cleaner and then stored in a tank. The water is often mixed with a chemicals that wash the carpet as well. Steam carpet cleaning is one of the deepest ways of cleaning carpets. The carpet becomes anti-allergic once it has been steam cleaned as the dust mites aren’t as present. It’s best to hire a proper cleaning company as their machinery used is professional and gets the job done better than standard steamers.
Dry Powder is a method that doesn’t employ the use of water and therefore is known as dry cleaning or powder cleaning. Dry powder is absorbent and is made of a solvent, soap, and water. The powder is sprinkled on top of the carpet, and using rotating machines, it is spread all over that carpet before being left for around 15 minutes. With the use of a hoover, all the dirt and powder are then taken away. Without wetting involved, you can be sure there won’t be any mildew stench. Foam cleaner is almost the same method as steam carpet cleaning. Using a very fast rotating brush, a certain amount of shampoo is spread over the carpet and that creates foam in the process. The foam is then left for around an hour to dry. Using a hoover, the dirt is eradicated. The whole shampoo might not be jettisoned using a hoover hence steam cleaning may be necessary.